Logo Polyrium 200 by Solaris x2

Polymers for opto-electronic applications.

High hole mobility soluble p-type polymer semiconductor used as hole-transport layer (HTL) in organic and perovskite solar cells

DOWNLOAD PDF

PTAA

Polyrium-PTAA

PTAA

INFO
Polyrium-PTAA

Fluoro-PTAA

INFO
DOWNLOAD PDF

Fluoro-PTAA

logo Polyrium gold

PTAA

Description

Poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine]-end capped, PTAA, an highly performant hole-transporting, electron-blocking semiconducting polymer that improves open-circuit voltage (Voc), fill factor (FF) and overall performances of various solar cell systems.

ptaa graphics

PTAA as HTL in perovskite solar cells achieving high power conversion efficiencies (PCE). PTAA displays superior mechanical robustness in terms of cohesion with a cohesion energy (Gc) coefficient over 17 J m−2, the highest reported Gc value among HTL materials.

Polymer for opto-electronic applications.

Various Mw ranges and specific Mw Polyrium batches available to fit your formulations, device fabrication processes and methods (Mw available from 5 kDa to 1000 kDa).

title opv
PTAA batch

(p-type)

PTAA

Available at g level (Tech centers and universities) and Available at kg level (for industrial developments).

Buy now!
POLYRIUM BATCHES
solaris ptaa 1

High Mw PTAA fibers

solaris ptaa 2

PTAA self supported thin film

flexible solar cell with Solaris PTAA

Flexible Solar Cell incorporating PTAA

The Polyrium Difference by Solaris

PTAA Advantages:

  • Various Mw ranges available (5 kDa to 1000 kDa) to fit your formulations, device fabrication processes and methods (Custom Mw available).
  • High Molecular weight (Mw), soluble and processable PTAA (1).
  • End-capped to limit any side photo-reaction during device operation.
  • Fully scavenged using our proprietary scavenging and cleaning methods to yield ultra low metal content, pale yellow powders and fibres for longer terms device stability.
  • High film strength without sacrifying performances and Power Conversion Efficiency (PCE) (2).
  • Available on the kilo level and ready for pilot plant and commercial device fabrication.
  • Specific Polyrium batches with precise Mw and pdi available (Mw Polyrium batches).

(1) Solubility may vary depending on Mw, processing temperature and solvents used.

five stars customer

Logo Polyrium 200 by Solaris x2

ptaa solaris solar cell advantages3
img solarischem ptaa

References

  • (1)(2) “Hole-Transport Layer Molecular Weight and Doping Effectson Perovskite Solar Cell Efficiency and Mechanical Behavior”

    Author(s): Inhwa Lee, Nicholas Rolston, Pierre-Louis Brunner, Reinhold H. Dauskardt*.

    Cite this: ACS Appl. Mater. Interfaces 2019, 11, 26, 23757–23764
    Publication Date:June 11, 2019
    DOI: https://doi.org/10.1021/acsami.9b05567
    Copyright © 2019 American Chemical Society

logo Polyrium gold
title opv

(p-type)

PTAA

Polymer for opto-electronic applications.

Various Mw ranges and specific Mw Polyrium batches available to fit your formulations, device fabrication processes and methods (Mw available from 5 kDa to 1000 kDa).

Available at g level (Tech centers and universities) and Available at kg level (for industrial developments).

Buy now!
POLYRIUM BATCHES

Fluoro-PTAA

Description

Poly[bis(4-phenyl)(4-fluoro-2-methylphenyl)amine is one of the family members of
poly(triaryl)amine, closely related to PTAA but with a deeper HOMO energy level of −5.52
eV (vs −5.14 eV for PTAA).

F-PTAA as HTL in perovskite solar cells achieving high power conversion efficiencies (PCE). F-PTAA displays a deeper HOMO level than PTAA, allowing to fine tune work functions of photovoltaic systems.

solarischem fibers fluoro ptaa

High Mw Fluoro-PTAA fibers

References

  • “Sequentially Fluorinated PTAA Polymers for Enhancing VOC of High-Performance Perovskite Solar Cells”

    Author(s): Youngwoong Kim, Eui Hyuk Jung, Geunjin Kim, Donguk Kim, Bumjoon J. Kim, and Jangwon Seo*.

    DOI: 10.1002/aenm.201801668

title opv
logo Polyrium gold
fluoro-PTAA

Fluoro-PTAA

Polymer for opto-electronic applications.

Various Mw ranges and specific Mw Polyrium batches available to fit your formulations, device fabrication processes and methods (Mw available from 5 kDa to 200 kDa).

Available at g level (Tech centers and universities) and Available at kg level (for industrial developments).

Buy now!
POLYRIUM BATCHES

The Polyrium Difference by Solaris

Fluoro-PTAA Advantages:

  • Various Mw ranges available (5 kDa to 200 kDa) to fit your formulations, device fabrication processes and methods (Custom Mw available).
  • High Molecular weight (Mw).
  • Excellent semiconductor material that transports holes and blocks electrons due to its electron-rich components.
  • The use of this polymer can significantly improve the open-circuit voltage (VOC) and the fill factor (FF) of the cells in high-performance perovskite solar cells.
  • Fluoro-PTAA can be coated as a substrate material used for hole transport in the manufacture of many devices such as perovskite solar cells, organic light-emitting diodes (OLED) and organic field-effect transistors.
  • Specific Polyrium batches with precise Mw and pdi available (Mw Polyrium batches).
five stars customer
Logo Polyrium 200 by Solaris x2
SOL2446 F PTAA white
SolarisChem Green Chemistry

Environmental preservation / sustainability

SUSTAINABILITY is at the core of what we do and our engine for growth, which is why we prioritize the use of GREEN CHEMISTRY, avoid wastes, recover and recycle solvents and materials as much as possible and use renewable hydro-electrical energy to power our operations.

Read More